Inquire to obtain the latest TDS file.
1606 Emulsifiable Ester Lubricant additive offers excellent interface lubrication, rust prevention, and cleaning effects. It effectively reduces tool and chip adhesion, improves surface finish, and reduces tool wear, making it especially suitable for nonferrous metal machining. It also provides exceptionally strong resistanceto hard water.
It is recommended for use in fully synthetic, semi-synthetic, and emulsified oil-based water formulations, with performance far e.xceeding that of ordinary animal oils. It is particularly well-suited for f-ormulating cutting oils and stamping/stretching oils, especially excellingin aluminum machining processes with outstanding cutting performance.This product is ideal for use in cutting, grinding, wire drawing, stampingand other full/half-synthetic metalworking fluids.
It provides excellent lubricity in fully synthetic and semi-synthetic machining fluids. It can also make the machining fluid low-foaming, soap-free, and odor-free. It is non-corrosive to non-ferrous metals (especially aluminum-magnesium alloys).
Physical Properties:Over time, the working fluid may turn white, and soap precipitation mayoccur. Therefore, in fully synthetic cutting fluid formulations, it is generally recommended to limit the addition to no more than 6%, though adjustments can be made for specific operating conditions.
Appearance Characteristics:Yellow transparent liquid.
Features
1. It has excellent metal interface lubrication, anti-rust, and cleaning effects, and can effectively reduce the phenomenon of impurities released during metal tool cutting that stick to the tool and swarf. In addition, this product can improve the finish of the product and reduce the wear of the tool. It is especially suitable for the processing environment of non-ferrous metals. The product is also very resistant to hard water.
2. It is recommended to be used in water-based fluid products such as fully synthetic, semi-synthetic, and emulsified oils. Its performance is much higher than ordinary
animal oils. It is suitable for blending cutting oil, stamping and drawing oil. Especially in the aluminum processing process, it can show super cutting performance.
3. Especially suitable for use in cutting/grinding/drawing/stamping and other full/semi-synthetic metal working fluids.
Comparative Foam Performance Chart with Competitors
Test Components: 1% Lubricant + 1.5% Triethanolamine + 97.5% Deionized Water
Foam Test: Take 40 ml of the test solution in a 100 ml graduated cylinder, shake it vigorously up and down 100-120 times within 1 minute, and record the volume (ml) of the upper layer foam for a specific period.
Hard Water Resistance Comparison
Physical and Chemical Properties of the Product
| Name |
Data |
Unit |
| Appearance |
Amber or reddish-brown transparent liquid |
– |
| Specific Gravity |
0.994 |
– |
| 40℃ Viscosity |
420 |
mm2/s |
| Acid Value |
49 |
mg.KOH/g |
| Pour Point |
<-5 |
℃ |
Packaging and Storage
200KG/drum, 1000KG/drum.
Store in a cool, dry place, away from acids and water.
Transport as a general non-hazardous chemical.
We welcome your feedback and suggestions. Whether positive or critical, we’ll take them seriously and continue to improve. Thank you for your support!